辐射4的ini配置文件优化

字号+ 编辑: 呆头鹅甲 修订: 呆头鹅甲 来源: 原创 2015-02-07 12:08 我要说两句(1)

辐射4的ini配置优化在国内论坛讨论的结果五花八门,那么真正的优化姿势应该是什么样的呢?这里是由国外某玩家总结的优化方案。

0a. 更新你现有显卡驱动

最新的显卡驱动程序是 Catalyst 15.11.1 Beta (AMD GPUs),NVIDIA的是 GeForce 359.00 WHQL.

如果你的GPU驱动里没有清洁安装(比如在安装新驱动之前先卸载旧驱动)这一选项, 那么先用显卡驱动卸载程序先重启到安全模式, 卸载你眼下的GPU显卡驱动、清理注册表, 然后再重启电脑进入正常模式安装最新的驱动。

0b. 使用 ReShade+SweetFX 零性能损失来增强一点视觉效果

ReShade+SweetFX represents a means of improving the visual quality of almost every PC game by tweaking individual parameters such as contrast, antialiasing, HDR, bloom, texture sharpness, etc. Through the use of user-generated presets, you can tweak Fallout 4 to match your own visual preferences. Please check out this ReShade+SweetFX preset to see how ReShade+SweetFX can help your game look more to your liking!

Installation instructions for ReShade+SweetFX can normally be found on the page dedicated to the preset of your choice. However, sometimes the author's recommended version of ReShade+SweetFX might not work for you, or there will be a more updated version available. If that is the case, then please follow the instructions below to get the latest version of ReShade+SweetFX working with Fallout 4!

注意: ReShade+SweetFX does not work well with any other overlays (e.g FRAPS), so make sure that all overlays are disabled before trying to run any games with ReShade+SweetFX. If you already have ReShade+SweetFX files in your game folder, remove all of them as shown below before installing a new version!

安装 ReShade+SweetFX:

a. 下载包含最新版本的Reshade+SweetFX (建议2.0 Crosire injector 预览版  1.1.0)并自己找个地方解压。压缩包里应该有: SweetFX 文件夹, EULA.txt, README.txt, ReShade Setup.exe, ReShade.fx, ReShade32.dll, ReShade64.dll 和 Sweet.fx

b. 看你自己的辐射4游戏安装目录, 把 SweetFX 文件夹和 ReShade.fx 、 ReShade64.dll 和 Sweet.fx 拖进去.

c. 重命名 ReShade64.dll ,改成 dxgi.dll

d. In the copied SweetFX folder at the Fallout4.exe's location you will find the SweetFX_settings.txt file containing all of the settings that make your game look the way you want it to. The problem now is, any downloaded preset from the SweetFX Settings Database may not be directly compatible with the newest versions of ReShade and SweetFX, which means that you might need to manually edit all of the settings from the downloaded preset into your newly copied SweetFX_settings.txt file!

e. Open the downloaded preset and the SweetFX_settings.txt file side-by-side and manually enable/disable all of the relevant settings (i.e. set SMAA, LumaSharpen, Tonemap, Vibrance, etc., to "1" - enabled or "0" - disabled), as well as edit the individual setting numbers (e.g. SMAA_Threshold, Sharp_strength, Vibrance, Dither_method, etc.) so that they match those in the downloaded preset!

f. 运行游戏,如果目前已经安装完了 ReShade 和 SweetFX, 你会在游戏启动时在屏幕上看到临时的文字, 显示的都是当前 ReShade 和 SweetFX 的版本. 

按键盘上的Scroll lock按钮会切换ReShade/SweetFX的开关, 自己看效果。

Furthermore, pressing the "Scroll Lock (ScrLk)" button on your keyboard will result in ReShade/SweetFX turning ON and OFF, so that you might better see the difference it makes in-game!

g. 开玩。Start game.

卸载 ReShade+SweetFX 的方法:

从辐射4的游戏文件里面删掉: SweetFX folder, dxgi.dll, dxgi.txt, ReShade.fx 和 Sweet.fx 这几个文件.

0c. 使用 ENBoost 提高效果减少卡顿

PC fans of previous Bethesda games will surely recognise the work of Boris Vorontsov and his excellent ENBSeries graphics mods and ENBoost memory and performance optimisations. Fortunately for us, Mr. Vorontsov recently published an ENBoost for Fallout 4, which helps smooth out framerates, reduce stuttering and fix texture pop-in! Here is how to install it and see if it brings a positive change to your game for yourselves:

a. 下载最新的 ENBoost for Fallout 4 并存到硬盘别的地方

b. Extract the files from the downloaded archive and copy the contents of the "Patch" or "WrapperVersion" folder (name can change from version to version) to your game's installation folder where the Fallout4.exe file is located

c. 下载最新版本的 enblocal.ini 文件包,先临时放到游戏文件夹外面。

Download the latest version of enblocal.ini file package, and place it outside the root path of the game folder.

d. 根据你目前电脑硬件的实际配置,从下载到的压缩包里选择性地解压以下文件夹其中的一个

  • "MaximumPerformance_8GbRAM"

  • "MaximumPerformance_16GbRAM"

  • "MaxStability"

到你 Fallout4.exe 文件所在游戏运行目录里,把原来版本的 enblocal.ini 覆盖掉 (打个比方,如果你电脑有8G的内存,那么把 MaximumPerformance_8GbRAM 文件夹里的enblocal.ini 拷贝到你游戏目录里。)

e. 正常启动游戏,如果安装正确的画会看到欢迎界面。

之后你可以主动编辑 enblocal.ini 文件用以下配置行把帧数调整到 60 FPS

[LIMITER]
EnableFPSLimit=true
FPSLimit=60.0

By doing the above, you can cap your framerate to the game's maximum safe limit (i.e. 60 FPS) without needing to use AMD's/NVIDIA's driver software for it! ;)

NOTE: If you have other programs that hook into the game (e.g. Steam Overlay, xFire, RadeonPro, etc.), your game might crash on startup with ENBoost installed! To fix this, disable any other overlays that you might be using before starting the game with ENBoost installed.

来源: Boris Vorontsov's Stuttering and Memory patch ENBoost, MrJelle

0d. 使用 Bilago's Fallout 4 Configuration Tool 作调整

In case you prefer to save some time and not tweak everything detailed in the following sections by hand, you can now use Bilago's Fallout 4 Configuration Tool to increase your field-of-view (FOV), disable mouse acceleration, toggle framerate locking, toggle gamepad support, disable the intro videos, tweak your mouse and/or gamepad sensitivity, change your resolution, choose between Fullscreen, Windowed and Borderless Windowed modes, toggle the Developer Console, change your Pip-Boy and V.A.T.S. colours and disable gore!  ;)

来源: Bilago's Fallout 4 Configuration Tool

1. 跳过游戏介绍视频并让载入画面的过程快起来

跳过介绍视频能让载入游戏、读进度的速度变快, 打开 Fallout4.ini ("...\Documents\My Games\Fallout4") 用文本编辑器 (比如 Notepad++) 在 [General] 配置块下面添加或修改如下配置项:

[General]
sIntroSequence=0
fChancesToPlayAlternateIntro=0
uMainMenuDelayBeforeAllowSkip=0

记得关闭之前先保存 Fallout4.ini

来源: PCGamingWiki

2. 了解显示设置和这些设置对游戏画面的影响

Andrew Burnes from NVIDIA compiled an excellent illustrated explanation of each in-game setting in the official NVIDIA graphics, performance & tweaking guide for Fallout 4. If you are curious to see which settings do what or by how much they will impact your in-game performance, then look no further than his terrific article!

For your convenience, here is a quick referencing list that summarizes Andrew's fantastic guide and also provides suggested values for getting the most bang for your buck both visually and performance-wise:

  • Actor Fade - 角色淡出。控制角色、敌人的显示距离,太远就看不见,配置好一点的话,建议值50% (~ 5 FPS hit)

  • Ambient Occlusion -  环境光散射。两个物体阴影互相重叠时候的结合阴影,建议配置好的同学才开启 SSAO (~ 7 FPS hit)

  • Anisotropic Filtering - affects the sharpness of textures, especially those in the distance or on the sides of the screen; recommended value: 16x (~ 3 FPS hit)

  • Anti-Aliasing - removes the aliased or jaggy appearance of models and textures; recommended value: TAA (~ 2 FPS hit)

  • Decal Quantity - governs the number of bullet holes, blood spatter and other incidental details visible on surfaces; recommended value: High (~ 5 FPS hit)

  • Depth of Field - adds a screen blurring effect that emphasizes the action, characters, and certain game elements; recommended value: Bokeh (~ 5 FPS hit)

  • Distant Object Detail - controls the quality of buildings and other large objects and their visibility at a distance; recommended value: Ultra (~ 4 FPS hit)

  • Godrays Quality - 上帝光。产生直射光源分裂效果,流畅度杀手,建议值: Low 或者干脆不要开 (~ 6.5 FPS hit)

  • Grass Fade - 调整草植物渲染距离和能见度;建议值 30% 。低配显卡将大量影响显存实用占比和帧数

  • Item Fade - adjusts the view distance of movable game elements, such as buckets, bottlecaps, bones, etc.; recommended value: 50% (~ 3 FPS hit)

  • Lens Flare - adds halos and highlights when the camera is pointed in the direction of a bright light; recommended value: On (less than 1 FPS hit)

  • Lighting Quality - adjusts the fidelity of lighting, the quality of shaders, and the quality of light-material interaction; recommended value: Medium

  • Object Fade - adjusts the view distance of immutable game elements, such as trees, fences, cars, etc.; recommended value: 50%  (~ 3 FPS hit)

  • Object Detail Fade - has a very, very, very minor impact on the fidelity of objects rendered by Object Fade; recommended value: Ultra (~ 1.6 FPS hit)

  • Rain Occlusion - rain won't be rendered around your character if you're beneath an elevated highway, for instance; recommended value: On (~ 5 FPS hit)

  • Screen Space Reflections - adds reflections of environmental objects to reflective surfaces, such as bodies of water; recommended value: On (~ 5 FPS hit)

  • Shadow Distance - 控制阴影的渲染距离, 在近距离阴影渲染时,额外渲染景深等细节阴影效果; 建议值选Medium 低配显卡将严重影响帧数

  • Shadow Quality - adjusts the visibility, detail level, and fidelity of shadows throughout the game; recommended value: Medium ( ~ 7 FPS hit)

  • Texture Quality - governs texture detail, but in reality has no discernible visual impact; recommended value: Ultra (less than 1 FPS hit)

  • Wetness - 湿润效果。让物体和人物表面产生湿润和一定反光高亮的效果,流畅度杀手,性能好的可以: On (~ 5 FPS hit)

来源: Andrew Burnes (NVIDIA)

3. 禁用 "NVIDIA Streamer Service" 提高效果并减少崩溃概率

If you are using an NVIDIA GPU, then you are also likely using NVIDIA GeForce Experience. While the latter can be very useful for determining what settings your rig should lean towards, it also introduces a new service, called "NVIDIA Streamer Service", that is only used for streaming your games to SHIELD devices and is actually causing framerate issues in many recent games, including Grand Theft Auto V and The Witcher 3: Wild Hunt.

To turn this unnecessary service completely off and regain your lost framerate, as well as prevent any associated crashes, click on the Start Button on the Windows taskbar, search for "Services" and then right-click its icon and select "Run as administrator".

Using this screenshot as a visual guide, scroll down through the "Services (Local)" list, find and right-click on NVIDIA Streamer Service, then select "Properties". First click on "Stop" to turn the service off, confirm that you also want to stop "NVIDIA Streamer Network Service" and then select "Startup type: Disabled" from the drop-down menu for both of these services.

来源: TechPowerUp

4. 禁用鼠标加速

鼠标控制器加速可以通过编辑文件来禁用 ("...\Documents\My Games\Fallout4"):

如何关闭鼠标加速?

[Controls]
bMouseAcceleration=0

关闭 Fallout4.ini 之前先保存一下!

来源: PCGamingWiki

5. 修正横竖轴鼠标灵敏度差异

个别诡异情况下, 辐射4在横竖方向的鼠标敏感度是不同的,不过是有办法修正这个毛病的! 打开 Fallout4.ini 文件,找到 [Controls] 配置块:

[Controls]
fIronSightsPitchSpeedRatio=1.0000 (Default value: 0.8000)
fPitchSpeedRatio=1.0000 (Default value: 0.5625)

The first parameter controls sensitivity when aiming down the sights, while the second sets the ratio of vertical movement to horizontal movement when aiming from the hip. Bethesda weirdly made the defaults 0.8000 for fIronSightsPitchSpeedRatio and 0.5625 for fPitchSpeedRatio and this is why moving the mouse around felt wrong by default!

关闭 Fallout4.ini 之前先保存一下!

来源: NeoGAF Fallout 4 modding thread

6. 修复下压武器准星时的灵敏度 Fix sensitivity when aiming down weapon sights

The default sensitivity when aiming-down-sights is a bit low, so to fix this open your Fallout4.ini file ("...\Documents\My Games\Fallout4") with a text editor (e.g. Notepad++) and copy/paste the following new section and line below:

[Main]
fIronSightsFOVRotateMult=2.136363636 (for 16:9 monitors)

NOTE: This value has not yet been confirmed to work perfectly weel for other aspect ratios!

关闭 Fallout4.ini 之前先保存一下!

Source: Gabi's Fallout 4 Steam Guide

7. Change the camera and model field-of-view (FOV) values

The rather claustrophobic default field-of-view (FOV) can be changed by opening your Fallout4.ini file ("...\Documents\My Games\Fallout4") and adding the following two lines under the [Display] section:

[Display]
fDefaultWorldFOV=X, which is your third-person FOV value
fDefault1stPersonFOV=Y, which is your first-person FOV value

For the best results, X and Y should match (e.g. set both to "90"). Finally, remember to save the changes to your Fallout4.ini file before closing it!

Source: PCGamingWiki

To also change your model FOV (i.e. the size of your gun model and Pip-Boy) do the following. If you find your Pip-Boy to be too small, press the tilde key "~", then type "fov X", where X is a smaller number if you want the model to be larger on-screen and vice-versa (note that this might take same trial and error to get exactly right!). Next, type in "refreshini", doing so will make it so your game will not revert to the default 80 FOV. Finally, press "~" again to close the console, then save your game and from that point on your game will use the newly-set FOV values!

Here are some visual examples for different model FOV values:

Default camera FOV (80) and default model FOV (80)

Default camera FOV (80) and modified model FOV (110)

Modified camera FOV (110) and modified model FOV (110)

Source: Gabi's Fallout 4 Steam Guide

8. 在GPU显卡控制面板设置里进行微调来优化你的游戏体验 Tweak your GPU's Control Panel settings for improved performance and smoothness

NOTE: The following applies to NVIDIA GPUs, but RadeonPro can be used to apply equivalent settings for AMD GPUs as well!

Donwload NVIDIA Inspector, extract the archive at any location of your choosing and run "nvidiaInspector.exe" (p.s. no installation is required!). In the main window, click on the wrench and screwdriver icon, then in the newly opened window search for Fallout 4 from the drop-down menu in the top-left corner of the window and configure the settings bellow as follows:

Maximum Pre-Rendered Frames: 1

Power Management Mode: Prefer maximum performance

Threaded Optimization: On

For your convenience, please check out these visual guides. Finally, click the "Apply changes" button and you are good to go!

9. 修复N卡SLI整数缩放问题 Fix NVIDIA SLI scaling issues

Open NVIDIA Inspector, click on the wrench and screwdriver icon, then in the newly opened window search for Fallout 4 from the drop-down menu in the top-left corner of the window and configure the settings bellow as follows:

SLI compatibility bits (DX1x): 0x080202F5 (Batman: Arkham City)

Multi-display/mixed-GPU acceleration: Single display performance mode

NVIDIA predefined number of GPUs to use on SLI rendering mode on DirectX 10: SLI_PREDEFINED_GPU_COUNT_DX10_TWO (for two GPUs) or SLI_PREDEFINED_GPU_COUNT_DX10_THREE (for three GPUs) or SLI_PREDEFINED_GPU_COUNT_DX10_FOUR (for four GPUs)

NVIDIA predefined SLI mode on DirectX10: SLI_PREDEFINED_MODE_DX10_FORCE_AFR2

Remember to click on the "Apply changes" button in the top-left corner of the window and you are good to go!

来源: Gabi's Fallout 4 Steam Guide

10. Minimise stuttering and eliminate screen tearing

If you are experiencing stuttering, the following tweaks can help mitigate it, if not remove it altogether, with the added benefit of eliminating screen tearing as well:

a. Open your Fallout4Prefs.ini ("...\Documents\My Games\Fallout 4") file and disable the game's internal V-sync:

[Display]
iPresentInterval=0

b. In the same file, force the game to use either exclusive fullscreen or borderless windowed mode (whichever performs better on your system!) by tweaking the following parameters:

无边框全屏模式

[Display]
bTopMostWindow=0
bMaximizeWindow=0
bBorderless=0
bFull Screen=1

无边框窗口模式

[Display]
bTopMostWindow=0
bMaximizeWindow=0
bBorderless=1
bFull Screen=0

c. Open NVIDIA Inspector, click on the wrench and screwdriver icon, then in the newly opened window search for Fallout 4 from the drop-down menu in the top-left corner of the window and configure the settings bellow as follows:

Frame Rate Limiter: 60 fps

Vertical Sync Smooth AFR behavior: Off

Vertical Sync Tear Control: Standard

Vertical Sync: Force on

For your convenience, please check out these visual guides. Finally, click the "Apply changes" button and you are good to go!

NOTE: Limiting your framerate to a maximum of 60 FPS is critical in Fallout 4, because the game engine’s internal speed is governed by your framerate. Playing at framerates higher than 60 FPS can therefore result in unforeseen bugs and glitches, such as getting stuck on furniture and computer terminals!

来源: Blitzhex

11. Work around the hard-bound keys with AutoHotkey

For some other dubious reason, Bethesda thought it would be a good idea to hard-bind certain keys, preventing us from rebinding the keyboard controls to fit our liking. Luckily for us, iFailed put together an extremely detailed tutorial for bypassing the imposed limitation. Kudos to you, my friend, shame on the person who thought having hard-bound keys would be a good idea in the first place!

来源: iFailed's AutoHotkey Tutorial

12. 手动调整更多的显卡配置文件  Manually tweak the graphics settings even further

Andrew Burnes listed dozens of tweakable .ini parameters at the end of his official NVIDIA graphics, performance & tweaking guide for Fallout 4. If you are willing to experiment with tweaks other than those listed in this post, first back-up the Fallout4Prefs.ini file in your "...\Documents\My Games\Fallout4" folder, then open it with a text editor (e.g. Notepad++) and increase the following parameters above their "Ultra" values to improve visual fidelity, or decrease them in order to improve performance:

角色模糊调整  Actor Fade Tweak

fLODFadeOutMultActors=X [Ultra value: 15]
Decal Quantity Tweaks
uMaxDecals=X [Ultra value: 1000]
uMaxSkinDecals=X [Ultra value: 100]
uMaxSkinDecalsPerActor=X [Ultra value: 40]

物体细节距离调整 Distant Object Detail Tweaks

fTreeLoadDistance=150000.0000 [Ultra value: 75000.0000]
fBlockMaximumDistance=500000.0000 [Ultra value: 250000.0000]
fBlockLevel2Distance=220000.0000 [Ultra value: 110000.0000]
fBlockLevel1Distance=180000.0000 [Ultra value: 90000.0000]
fBlockLevel0Distance=120000.0000 [Ultra value: 60000.0000]

Here is a comparison screenshot taken with the above tweaks!

上帝光质量调整 Godrays Quality Tweak

GR grid=128 [Ultra value: 64]

草木模糊调整 Grass Fade Tweaks

fGrassStartFadeDistance=14000 [Ultra value: 7000]
fGrassMaxStartFadeDistance=14000 [Ultra value: 7000]

装备模糊调整 Item Fade Tweak

fLODFadeOutMultItems=X [Ultra value: 15]

物体模糊调整 Object Fade Tweak

fLODFadeOutMultObjects=X [Ultra value: 15]

粒子效果调整 Particle Tweak

iMaxDesired=X [Ultra value: 750]

Screen Space Reflections Tweaks

NOTE: The following tweaks need to be applied via the in-game console, accessible by pressing the tilde key ("~") in-game!

SSRI [number]: (default value: 1) - adjusts the intensity of SSR

SSRBP [number]: (default value: 1) - adjusts the blending power of SSR

SSRAT [number]: (default value: 0.2) - adjusts the angle threshold of SSR

SSREFF [number]: (default value: 0.2) - adjusts the edge fade factor of SSR

SSRVBP [number]: (default value: 50) - adjusts the vertical blur power of SSR

SSRVAP [number]: (default value: 2) - adjusts the vertical alignment power of SSR

SSRVSP [0.0-1.0]: (default value: 0) - adjusts the vertical stretching power of SSR

SSRRSS [number]: (default value: 8) - adjusts the ray step scale of SSR

阴影距离调整 Shadow Distance Tweaks

fShadowDistance=17000 [Ultra value: 20000.0000]
fDirShadowDistance=17000 [Ultra value: 20000.0000]

阴影质量调整 Shadow Quality Tweak

NOTE: The following tweak has a ~ 30 FPS impact!

iShadowMapResolution=8192 [Ultra value: 4096]

uGrids Tweak

uGridsToLoad=7 [Default value: 5; Max value: 13]

Here is a comparison screenshot to exemplify the impact of tweaking uGrids!

NOTE: Just like in The Elder Scrolls V: Skyrim, the above tweak can break your save games, so to prevent that, please observe the following instructions from Andrew Burnes:

    Start Fallout 4 and load up a saved game

    Press Alt+Tab to switch out of Fallout 4 and move back to your Desktop

    Edit your Fallout4Prefs.ini file as you would normally, modifying the "uGridsToLoad" variable to the desired value. Save the changes to your "Fallout4Prefs.ini" file and close it

    Press Alt+Tab once again to switch back to Fallout 4

    Open the in-game console by pressing the tilde key ("~") and type "refreshini"

    Save your game to a new save slot, and it should now have the correct new "uGridsToLoad" value!

水体效果调整 Water Effects Tweaks

NOTE: The quality of water effects cannot be improved in Fallout 4 due to their LOD levels having being hard-locked by Bethesda, but the following individual components can still be enabled/disabled to your liking:

bUseWaterDisplacements=1 (enabled) or 0 (disabled)
bUseWaterRefractions=1 (enabled) or 0 (disabled)
bUseWaterReflections=1 (enabled) or 0 (disabled)
bUseWaterDepth=1 (enabled) or 0 (disabled)

来源于 Andrew Burnes (NVIDIA)  Source: Andrew Burnes (NVIDIA)

13. 个人自用的配置  Personal working configuration

为了读者快速浏览,我在下面列出了个人玩《辐射4》的所有调整方式:

Fallout 4 Configuration Tool settings

Visual guide

Fallout 4 Launcher Graphics settings

Aspect ratio: 16:9 Widescreen

Resolution: 1920x1080

Antialiasing: TAA (Best quality)

Anisotropic filtering: 16 samples

Windowed: On (ticked)

Borderless: On (ticked)

Texture Quality: Ultra

Shadow Quality: Ultra

Shadow Distance: Medium

Decal Quality: Ultra

Lighting Quality: Ultra

Godrays Quality: Low

Depth of Field: Bokeh (Best quality)

Ambient Occlusion: SSAO (High)

Screen Space Reflections: On (ticked)

Wetness: On (ticked)

Rain Occlusion: On (ticked)

Motion Blur: Off (unticked)

Lens Flare: On (ticked)

Object Fade: Maximum

Actor Face: Maximum

Grass Fade: Maximum

Item Face: Maximum

Distant Object Detail: Ultra

Object Detail Fade: Ultra

NVIDIA Inspector settings

Frame Rate Limiter: 60 fps

Maximum pre-rendered frames: 1

Vertical Sync Smooth AFR behavior: Off

Vertical Sync Tear Control: Standard

Vertical Sync: Force on

Power management mode: Prefer maximum performance

Threaded optimization: On

NVIDIA GeForce Experience settings

Share: Disabled

SHIELD: Disabled

SweetFX/ReShade versions and preset

K-putt'e Config 1.5 Performance Version

我的系统配置 My hardware & OS configuration:

Intel i5-3570K OC 4.4 Ghz, GeiL 8 GB DDR3 2133 Mhz, MSI GTX 980 Ti GAMING 6 GB GDDR5, Samsung 850 Pro 256 GB, BenQ XL2420T 120 Hz, Windows 10 Pro (x64)

阅完此文,您的感想如何?
  • 鼓掌

    2

  • 鄙视

    0

  • 开心

    0

  • 愤怒

    0

  • 可怜

    0

1.如文章侵犯了您的版权,请发邮件通知本站,该文章将在24小时内删除;
2.本站标注原创的文章,转发时烦请注明来源;
3.本站QQ群: 2702237

相关课文
  • Everspace(永恒空间)游戏攻略技巧

  • 侠客英雄传3DOS版 完整流程攻略、隐藏武器

  • 地下城堡2图13迷雾城古神门前的重力威压通过方法

我要说说
网上宾友点评
1楼 IP106.50.192.*的嘉宾 说道: 请翻译完了再发,看得我脑阔疼
辐射4的ini配置文件优化